2010 Toyota Corolla Transmission Fluid Capacity

The 2010 Toyota Corolla’s transmission fluid capacity is 6.9 quarts. This amount assumes you drain and refill approximately half of the vehicle’s automatic transmission fluid at least every few years.

Spending less money on maintenance can be a great way to save. Just make sure you get the correct type of transmission fluid for your vehicle’s gearbox so as not to damage it.

1. 1.8L Engine

The 2010 Toyota Corolla is powered by a 1.8L four-cylinder engine producing 132 horsepower and 128 pound-feet of torque. This motor can be paired with either a five-speed manual or automatic transmission, making it an efficient choice for everyday commuters.

The 1.8L engine is EPA-rated at 26/35 mpg city/highway with the manual, and 26/34 with an automatic transmission. Plus, this engine features Dual Variable Valve Timing with Intelligence (VVT-i), helping optimize power and fuel economy.

The Corolla is offered in multiple trim levels to meet a variety of buyer preferences. The base model comes standard with wind-up windows and manual door locks, while higher-end models boast wood grain trim and leather upholstery for an opulent look.

🚀Recommended article: 2010 Toyota Corolla Transmission Fluid Type

2. 2.4L Engine

A 2.4L engine is a type of car engine with a displacement of 2.4 liters. Displacement refers to how much air the engine can push through its cylinders.

In general, higher displacement engines produce more power than their smaller counterparts due to their ability to expend more air.

2.4L engines produce more torque, leading to greater acceleration. As such, many people opt for a 2.4L engine over a 1.8L one.

This engine can be found in several Toyota cars, such as the Corolla, Camry, RAV4, Highlander and Scion tC. Additionally, it’s found in other models like Scion xB, Matrix and MR2.

3. 2.4L CVT

A 2.4L CVT transmission can run on up to 4 quarts of automatic transmission fluid, though this capacity may differ depending on the vehicle model.

An automatic transmission fluid change usually involves taking out the pan, replacing the filter and refilling with fresh ATF. Before reinstallation of the pan, make sure it has been thoroughly cleaned.

The type of transmission fluid used in your car will impact its operation and how comfortable you feel driving it. For instance, General Motors recommends using long-life Dexron III in most of its newer models.

Older Ford automatics require “Mercon” fluid, while newer models use “Dexron II.” Matching the correct fluid to your car’s transmission is essential for optimal performance and longevity.

When adding or refilling transmission fluid, consult your owner’s manual for the exact amount. It may also be beneficial to install an auxiliary transmission fluid cooler for improved cooling; these coolers can lower operating temperatures by 80 to 140 degrees Fahrenheit.

4. 2.4L AWD

The 2.4L AWD’s transmission fluid capacity may be more difficult to locate than the 1.8L, but you can get it from Toyota’s owner’s manual. Be sure to read this manual thoroughly as it will specify exactly which fluid type and amount your model requires.

You can check the transmission’s fluid level yourself. To do so, park your car on a flat surface and use a dip stick to measure its level.

The fluid should be clear with a pink hue and free from dark or milky residues. If it does, then it could be burnt or dirty. In order to refill, make sure you purchase the correct type of fluid.

Leave a Comment

We use cookies in order to give you the best possible experience on our website. By continuing to use this site, you agree to our use of cookies.