The transmission is an integral component of your Toyota. Lubricating it with fluid ensures peak performance for years to come.
Toyota recommends that vehicles with automatic transmissions have their fluid changed every 60,000 to 100,000 miles, while manual transmissions should have their fluid replaced every 30,000 to 60,000 miles.
Type of Fluid
The 2010 Toyota Corolla transmission uses Dexron VI as its transmission fluid type. This heavy-duty fluid is designed to withstand harsh conditions and long trips alike.
The 2010 Toyota Corolla has been rated with an EPA fuel economy rating of 26 mpg City/Highway or 25 mpg Combined. It comes standard with an all-aluminum 1.8-liter four cylinder that produces 132 horsepower, using Dual Variable Valve Timing with Intelligence (VVT-i) to optimize valve timing for maximum engine power and emissions.
Despite its size, the current Corolla still features many of the styling traditions and safety components of previous models. At the front end, you’ll notice a reshaped grille, bumper, air dams and rear combination lamps for added visibility.
The Corolla is offered in base, S, LE and XLE trim levels with either a six-speed manual or five-speed automatic transmission. Equipment options on these models include a sliding lid center console, variable intermittent wipers and cruise control; the XLE adds 16″ alloy wheels, wood-grain trim, Optitron gauges and premium audio system.
🎯Suggested article: 2010 Toyota Corolla Transmission Fluid Capacity
Capacity
The capacity of fluid used in 2010 Toyota Corolla transmissions depends on several factors. For further guidance, it’s best to refer to your owner’s manual for details.
The oil in a vehicle’s transmission plays an essential role in its smooth running and long life. To guarantee optimal performance and safety, it should be changed regularly.
You can add transmission fluid to your car using either a dipstick tube or check plug hole in the transmission. Be careful not to overfill as this could damage the gearbox.
To do this, you first need to drain the old oil out of the transmission and refill it with new fluid. For this, you’ll need a socket wrench and drain pan. Additionally, make sure your vehicle is on an even surface so you can measure exactly how much fluid needs adding.
Addition Instructions
When it comes to transmission fluid types, it’s essential that you use the correct one. Consult your vehicle’s owner’s manual to identify which kind of Toyota Corolla you require.
The initial step is to take out the drain plug. Doing so will enable fluid to drain out more quickly.
Once all the old fluid has been drained away, it’s time to refill the system with red-colored and transparent fluid. Any fluid that appears darker in color or has brown streaks is likely burnt and should be replaced promptly.
Add the new fluid a small amount at a time, as this is an effective way to avoid overfilling the system and potential damage.
A small automotive funnel can be useful when pouring fluid into the system. Additionally, using the correct size head wrench when unscrewing drain and fill plugs is recommended.
Safety
Your transmission is a vital component of your vehicle. It should be replaced every 30,000 to 60,000 miles, but there are several things that could go awry before then.
Vibrations and lurching when driving slowly (around 30 to 45 mph) are often caused by an automatic gearbox issue.
Transmission fluid is of utmost importance and should be changed at the correct interval. Make sure to consult your manual for recommended timing, but if you need assistance, contact Courtesy Toyota of Brandon today!
Toyota Corolla transmission service includes fluid changes, gasket replacement, filter change, flush and inspection of all other components. Our Toyota master technicians are highly experienced and can do the job quickly and efficiently.