If you own a Toyota Corolla, you may experience issues with your automatic transmission. Shifting into first gear may be difficult, shifting out while driving can cause sudden jerking sensations or even the transmission not engaging completely.
In 2023, Toyota Corolla replaces its 1.9-liter and 2.0-liter engines with a continuously variable transmission (CVT), making it one of the few compacts with only an automatic transmission.
🚨You may be interested in: 2007 Toyota Corolla Transmission Fluid Capacity
Shifting Issues
Your Toyota Corolla automatic transmission should shift gears quickly and seamlessly, but if it appears to be taking an unusually long time to enter a particular gear or experiencing jumps or grinds during acceleration, there could be an issue with its workings.
Shifting issues are most often experienced with Toyota Corolla cars that have more than 125,000 miles on them, due to mechanical or computer-related issues.
Another frequent issue is a car that won’t shift into park. If this occurs, you can perform an emergency procedure to get the vehicle out of gear by applying your brakes and pressing on the shift lock release.
Some drivers have reported difficulty parking their car due to a stretched transmission cable. This issue often arises in vehicles parked on hills or inclined lots.
Delayed Engagement
When you get in your car and turn the key, shift into drive or reverse and your transmission seems to take a while before engaging, this is known as delayed engagement and it’s one of the most common problems with automatic transmissions.
Automatic transmissions contain a complex set of mechanisms, including gears, bands, clutches and solenoids that work together to shift your vehicle for you. Over time these components wear out and require replacement.
Delayed engagement can occur at any point during a shift and often goes undetected by the driver. Therefore, it is essential to give the transmission time to engage properly in order to prevent unnecessary damage.
When you experience a delay in engagement, try not to rev your engine. Doing so could damage the transmission’s bands and clutches due to increased engine speed generating friction.
💥See also: Transmission Fluid Capacity For 2014 Toyota Corolla
Slipping Gears
The transmission is responsible for translating engine power into movement. If your car seems to slip in gear without warning, be sure to get it checked out right away.
Slipping gears are a common issue with automatic transmissions, and they can be caused by various issues.
If your Corolla is an older model, a damaged clutch could be to blame. Additionally, transmission fluid may be low.
Alternately, a malfunctioning shift solenoid or torque converter (in automatic transmission vehicles) could be to blame.
Slipping gears is a common issue with Toyota Corollas and other automobiles that use automatic transmissions. This can be due to low fluid levels, worn-out parts, or an issue with the shift solenoid.
Leaking Fluid
If you detect red or brown fluid leaking from your Toyota Corolla, it could be indicative of an issue with your transmission. The leak could originate from either under or around your car in either place: under the pan or from underneath.
Leaking transmission fluid is the leading cause of transmission issues in both automatic and manual transmissions. Therefore, it’s essential that you monitor your fluid levels regularly and have them tested by an experienced technician.
One indication of an issue with your transmission could be if it doesn’t engage when shifting gears. This could occur for various reasons, such as low fluid levels, malfunctioning shift solenoids or even a problem with the valve body in your transmission.
If you’re facing any of the problems listed above, don’t wait to get them addressed right away. Acting quickly and taking care of issues as they arise now can save you money in the long run and prevent more costly problems from developing in the future.
👀Look at this: 2013 Toyota Corolla Transmission Price